DC 12V Gear Motor and PWM Driver Kit, 20-400 RPM Motor Series, Speed Reduction Motor with 8mm D Shaft(400RPM), Geared Motor

Specification: Item Type: Geared Motor Model: 5840-31ZY Working Voltage: 12V Shaft Length: Approx. 15mm / 0.6in Shaft Diameter: Approx. 8mm / 0.3in DC motor regulator CW and CCW control Model: CCM2 Working Voltage: DC 10V-30V Control Power: 12V x 3A=36W, 24V x 3A=72W, ＞24V, maximum 120W Rated Current: 3A Maximum Current: 5A PWM Pulse Width Adjustment Range: 5%-95% Potentiometer: value B10K, wire length is approx. 20cm / 7.9in, opening approx. 8mm / 0.3in Output Voltage: About of the input voltage Drive: Approx. 74 x 47 x 28mm / 2.9 x 1.9 x 1.1in Potentiometer is used for speed regulation Package List: 1 x Motor 1 x Governor 1 x CW and CCW Switch 1 x Knob 1 x Washer 1 x Bracket 4 x Mounting Screw Note: 1. When soldering is required on the positive and negative motor terminals of the power supply, the temperature of the soldering iron is 340℃±40℃, and the heating time is less than 3s. 2. The maximum bearing capacity of the gear is 70KG, blocking is forbidden, and the motor may be burnt if it is blocked for a long time. 3. When installing the motor, if the screw is too long, it will cause between the motor and the rotor, thereby affecting the characteristics.

• After the gear is ground, heat treated and filled with imported lubricating oil, has low friction coefficient and high load carrying acity.
• With brass turbine and double ball bearings, the noise generated by the motor running is small.
• The DC geared motor is equipped with governor and has strong torsion, suitable for curtain machines, billboards, window openers, etc.
• The shell of the geared motor is made of all metal, which is wear and not easy to , and has good thermal conductivity.
• The motor adopts stainless steel output shaft with a diameter of 8mm, a structure, and runs smoothly and silently.