Little Giant 6EC-CIA-SFS 1/3 HP, 115-Volt, 3180 GPH Automatic Cast Iron Submersible Sump/Effluent Pump with Polypropylene Base, Integral Snap-Action Float Switch and 10-Ft. Cord, Blue, 506807

The Little Giant 506807 6EC-CIA-SFS 1/3 hp, 3180 GPH, 115-volt pump is ideal for use as a sump or light effluent pump. This pump can handle up to 1/2" solids and has a 1.5" FNPT discharge. This pump comes with a 115-volt, 10' cord suitable for standard outlets in North American homes. The integral snap-action switch activates the pump when the water level reaches 8" - 11" and shuts off when the water level drops to between 2" and 5". Features & Benefits:- 1/3 horsepower PSC motor- 1-1/2" FNPT discharge- 140 °F (60 °C) liquid temperature ratingPump selection guidelines:Application: effluent pumps can be used to transfer or remove clean water or liquid effluent with up to 1/2" semi-solids. It is not designed to pass raw sewage. Switch options (not all may be available): - Tethered switches rise/drop with the depth of the water. They require a minimum basin size of 18". The on/off levels can be adjusted easily.- Diaphragm switches take up less room than a traditional tethered switch and uses water pressure to turn the pump on/off. A breather tube is located on the plug which must be free of debris for it to operate properly. The on/off levels cannot be adjusted.- Snap-action switches take up less room that a traditional tethered switch. The float rises/lowers with the water level. The on/off level cannot be adjusted. Piggyback vs. integral (built-in):- A piggyback plug allows the switch to be overridden to pump below the off level. It is easily replaceable. - An integral switch is built into the pump. An integral switch cannot be overridden so it is not the best choice for emergency water removal.

• BUILT TO LAST: epoxy-coated cast iron cover, housing and volute; nitrile/carbon/ceramic mechanical shaft seal ; cold-rolled steel shaft and upper and lower ball bearings;
• CONTINUOUS DUTY MOTOR: Features an energy-efficient 115-volt, 5 Amp, 600-Watt PSC (permanent split capacitor) motor and improved performance; standard 10-foot power cord
• AUTOMATIC OPERATION: Snap-action float switch turns pump on when water reaches 8 to 11 inches and shuts pumps off when water drops to between 2 and 5 inches
• SOLIDS HANDLING: clog-resistant impeller handles up to 1/2-inch semi solids suitable for light effluent waste
• SPECIFICATIONS: 1/3 HP, 115-Volts, 5 Amps, 600 Watts, 60 Hz, 53 GPM at 5-foot lift; 28-ft shutoff; 12.1 PSI, 10-ft cord, integral snap-action float switch; polypropylene base